|
Power Control Center
General Features
Panels will be suitable for 415 ± 6% volt, 3 phase (4W + E) 50 HZ AC supply
They will be installed indoors and will work efficiently up to an ambient temperature of 50ºC
All doors will be suitably labeled and marked for convenience of operation and maintenance
Construction
Modular design, Free standing, Floor mounting type using 2.0/1.6 mm
CRCA sheet. The complete structure shall be rigid, self supporting and
free from twists and bends. The panels will be totally dust and vermin
proof. They will have fixed or draw out type executions as many be
desired.
Finish
The entire panel will undergo pretreatment covering decreasing, water
rinsing and derusting / phoshating. It will be synthetic enamel painted
or powder catedas per requirements.
Bus Bars and Internal Wiring
Uniform cross section copper Bus Bars (current density 1.39
amps/sq.mm.) supported by SMC/DMC bases will be employed through out
the length of the panel. Internal wiring be carried out with 11000/650
volt grade PVC insulated stranded conductor wire. All joints will be
solidly crimped using copper thimbles Earthing Bus Bars will be running
all along the board.
Switchgear / Components
Along with the formal offer, the GA drawing and the bill of material
will be submitted specifying the makes and capacities of all the
material to be used in the panel.
Standards
Our panels conform to the standards such as IS 4237, IS 8623, IS 375
|